WhatsApp
+880 (174) 233-22-11
0
SHOPPING CART

Quick-Drying Metallic Bronze Conductive Paint Pen for PCB Circuit Trace Repair, Automotive Defroster Lines, and DIY Prototyping

(0 )
0
In stock
$8.98$11.97
Already Sold: 48%
Available: 94
Please select a variation to see estimated shipping cost.
Restore damaged circuit continuity with this hand-selected quick-drying bronze conductive suspension, engineered with microscopic metallic particles to draw low-resistance electrical traces instantly. Equipped with a precision pressure-assist dispenser barrel, it repairs broken PCB tracks, automotive rear-glass defroster grids, and remote control pads without hot soldering. An essential technical restoration tool for electronics labs in Frankfurt, maker studios in London, and home repair workshops across Austin.
Description

Quick Product Highlights

  • High-density metallic bronze pigment delivers low line resistance and reliable electrical conductivity upon drying.
  • Rapid room-temperature curing bonds strongly to fiberglass PCBs, acrylics, automotive glass, and paper substrates.
  • Pressure-assisted squeeze barrel body allows users to regulate paste extrusion rate for accurate line thickness.
  • Eliminates the need for soldering irons when bridging broken circuit board traces, jump starter tracks, or keypad contacts.
  • Compact 12.7cm pocket format with sealed airtight cap prevents the 3g conductive paste core from drying between uses.

Micro-Circuit Repair & Solder-Free Connectivity

Restore broken circuits and bridge micro-traces effortlessly with our curated Chic BigThumb PCB Bronze Conductive Pen, developed to make delicate electrical repairs accessible without complex soldering equipment. Inspected, viscosity-checked, and trace-resistance audited by the WishHour technical workshop in Dhaka, this conductive pen combines fine metallic bronze flakes with a fast-evaporating polymer binder. Sourced directly from audited global electronics maintenance facilities, it offers dependable line continuity for motherboard repair, automotive grid touch-ups, and interactive hardware prototyping.

Chic BigThumb PCB Bronze Conductive Pen Studio Profile
Conductive Paint Pen Dispenser View
Specification Attribute Curation Standard Details
Conductive Medium Micro-Particle Bronze Metallic Suspension in Fast-Drying Polymer Base
Net Ink Weight & Length 3g Active Conductive Paste; Overall Pen Length 12.7cm (5 Inches)
Applicator Mechanism Precision Squeeze-Assist Barrel with Fine Dispensing Orifice
Curing Characteristics Air cures at room temperature; reaches low-resistance conductivity upon full evaporation
Curation & Quality Control WishHour Studio Dhaka | Global Partner Sourced & Trace-Audited
Recommended Applications PCB trace bridging, vehicle rear window defrosters, membrane switches, and prototyping
Conductive Paint Pen Trace Drawing Demo
Bronze Conductive Paste Consistency
Conductive Pen Tip and Squeeze Barrel
Circuit Board Repair Application

Dispensing Technique & Curing Protocol

Application Technique: Because conductive paste is denser than traditional ink, shake the pen vigorously before use to distribute metallic particles evenly. Apply gentle, steady finger pressure to the flexible plastic pen body while moving the tip along your repair path. This ensures a consistent bead of paste flows through the orifice rather than spurting.

Curing Guidance: Electrical conductivity establishes as the solvent carrier fully evaporates. Allow the drawn line to dry undisturbed for at least 15 to 30 minutes at room temperature (or accelerate with a low-heat hot air gun for 2–3 minutes) before powering on the circuit or testing resistance with a multimeter.

Frequently Asked Questions

How does the conductive ink dispense, and why do I need to squeeze the barrel?

Unlike free-flowing felt pens, this tool contains a viscous metallic bronze paste designed not to bleed across tight PCB spaces. Squeezing the flexible plastic barrel creates internal pressure that pushes a controlled bead of conductive material through the tip onto your target trace.

Can this pen repair damaged automotive rear window defroster grids?

Yes. Its high-adhesion bronze suspension adheres securely to glass and restores electrical continuity across scratched or broken heating elements. Mask both sides of the damaged grid with painter’s tape, draw across the break, and let it cure fully before removing the tape.

How are WishHour orders sourced and fulfilled?

Every item is handpicked and quality-vetted by our curation team in Dhaka, then dispatched directly from our international partner distribution centers with end-to-end global tracking to provide efficient worldwide delivery.

Additional information
Color

01

High-concerned chemical

none

Origin

CN

Certification

NONE

Name

Conductive Paint Pen

Paint Color

Bronze

Pen Material

Plastic

Pen Length

Approx. 12.7cm/5in

Ink weight

3g

Reviews (0)

User Reviews

0.0 out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0

There are no reviews yet.

Be the first to review “Quick-Drying Metallic Bronze Conductive Paint Pen for PCB Circuit Trace Repair, Automotive Defroster Lines, and DIY Prototyping”